Temperature and Moisture Monitor (Bluetooth) with Thermostat Probe Cutout

*** Please note this will not connect to our acrylic nests, or our V2 or V3 3D printed nests, it will only connect to our V4 3D printed nests. If you are unsure, please contact us. ***

This is identical to our Temperature and Moisture Monitor (Bluetooth) for 3D Printed V4 Nests but with an additional cutout for a thermostat probe so that you can control the temperature within your nest with a heat cable connected to a thermostat.

The cutout is 10mm in diameter and 60mm long for the probe. We use White Tack to seal the probe in for an accurate reading.

*** The thermostat and Heat Cable are not included. ***

Thermostat on Amazon

We try to source as many products as we can, but sometimes it's just cheaper to purchase them on Amazon. *** Please note, we are not responsible for defects/issues with this product, this is just what we are using with our setup. Other options are available ***

Digital LED Heating and Cooling Thermostat

As an Amazon Associate we earn from qualifying purchases.