Menu
Your Cart

Magnetic Connectors (V3)

These are our magnetic connectors for our V3 nests and modules.

Acrylic Tube Connector - Magnetic Acrylic Tube Connector - Magnetic
2 - 3 Days
Brand: HighTechAnts
Our 'Acrylic Tube Connector - Magnetic' can be used to attach this Acrylic Tube to any of our magnetic connector modules and ant nests and formicariums. Due to the manufacturing process involved in making acrylic tube, they are not all perfectly the same width. To allow for this, we have had to..
£0.99
Ex VAT:£0.99
Module Blocking Plate - Magnetic Module Blocking Plate - Magnetic
Hot 2 - 3 Days
Brand: HighTechAnts
This blocking plate can be added to any of our magnetic connector modules either to permanently, or temporarily block the entrance to the module...
£0.99
Ex VAT:£0.99
Brand: HighTechAnts
This PVC tube connector fits all of our magnetic connector modules and is designed for PVC tube which has an outer diameter of 13mm and an inner diameter of 10mm. Tube can vary slightly in dimensions, but the tube connector is designed to fit the tube in our shop perfectly. The tube also has no ..
£0.99
Ex VAT:£0.99
Brand: HighTechAnts
Our Tubeless Connector fits all magnetic connection HighTechAnts modules and designed for ant keepers who don't want to use tube. Our Nests and other modules were always designed to be connected with tube, so when using this Tubeless Connector, not all connections are possible due to the proximity o..
£0.99
Ex VAT:£0.99
Brand: HighTechAnts
This connector enables you to connect a magnetic V3 module to the latest V4 module.What's included1x V3 to V4 Connector..
£0.99
Ex VAT:£0.99
Brand: HighTechAnts
Our 'Test Tube Connector for Plastic Test Tubes - Magnetic' can be used to attach this Plastic Test Tube setup to any of our magnetic connector modules and ant nests and formicariums. If you already have your ants in a test tube of your own, you will need to move them into one of these first.Due to ..
£1.09
Ex VAT:£1.09
Brand: HighTechAnts
*** This is now included with all nests and kits ***If you have one of our 3D printed nests with magnetic connectors and you want to use a heat cable with the nest, you will need this connector. This connector lowers the connection to other modules and outworlds to the same level...
£1.49
Ex VAT:£1.49
Brand: HighTechAnts
This connector can be used to save some space, and add some vertical elements to your setup. We have tested it with two 4 Way Double Connectors stacked using a tubeless connector between them.We would not recommend stacking any more than two modules and we have not tested stacking the nests vertical..
£3.99
Ex VAT:£3.99
Showing 1 to 8 of 8 (1 Pages)